The first piece of advice is to apply the right kind of pressure. It may seem common sense, but applying the appropriate amount of pressure when stamping is necessary to achieve the desired outcomes. Because smaller Washi Wooden Stamp doesn’t need as much pressure as larger ones, a slight tap can produce a clear print. If too much power is used, the ink will bleed over the paper and appear on the opposite side.
Using the Right Amount of Pressure
More effort and pressure would be needed if the Washi Wooden Stamps were more prominent. The print may come out unfinished or too light if inadequate pressure is applied. A more significant amount of pressure must be applied consistently to obtain a complete print of the pattern.
Obtaining Sharp Corners and Edges
The second piece of advice is how to stamp to produce a neat edge. Before stamping into your notebook, removing any extra ink from the Washi Wooden Stamp using a piece of paper towel is a good idea. Try giving the stamp a few mild taps on scrap paper first.
On the contrary, if the print is imperfect, you may quickly fill in the blank areas by using a pen of a color close to the ink used for the print. You may also delicately outline the design with the pen if the print is too light due to insufficient ink or force (see tip number one for more information). Because it is exceedingly difficult to be consistent with the stamp properly on the prior print, it is unlikely that an attempt to re-stamp would be successful even if it were made.
Getting the Stamps in Order
The alignment of many stamps is the topic of the third piece of advice. Proper alignment is typically required for letters and numerals on the stamps when combining many stamps to create a word.
Cover-Up with Washi Tape
If there is a portion of the stamp you do not want to be visible after it has been inked, all you need to do is cover that region with a piece of washi tape. This ensures that the portion above does not appear on the paper. This is my go-to method for maximizing their potential to get the most use out of the stamps in the collection.
Brush Pens can be used in place of ink pads.
You can try utilizing some brush pens as stamp ink as an alternative to purchasing a large number of various colored ink pads, and the following are some of the ones that worked very well in tests:
● Pentel paintbrush sign pens
● Zebra mild liner paintbrush pens
● Tombow double-brush pens are available.
Brush pens for coloring Koi images.
This trick will save you significant money if you have a substantial collection of brush pens. You will discover many more color options when you use your stamps.
Conclusion Stamping in batches are often known as making multiple impressions of the same thing stamp all at once, is the final piece of advice. Because of this time-saving tip, you won’t have to waste time selecting a stamp. Get your ink pad out of its case, and wiping the stamp after you’ve finished using it for a single stamp design.